Texas does not license auto glass techs. Anyone can buy a van, a caulk gun, and a case of urethane. The rules exist, but nobody checks. You have to check.
Ask if the shop follows AGRS, and if your tech is certified
AGRS is the Auto Glass Replacement Safety Standard. It is the ANSI-approved rulebook for how a windshield goes in. It covers how the old urethane gets trimmed and how the pinch weld gets prepped. It says which primers go where. It sets how long the car sits before you drive away.
Here is the part most people miss. A shop can say it is certified. The standard is written for the person holding the tool. Ask two questions. Is your shop registered with the Auto Glass Safety Council? Is the tech working on my car certified, and can I see the card?
A shop that trains to AGRS will answer both in about ten seconds. A shop that dodges the question is telling you something. Our AGRS-certified glass team is trained to that standard, and that includes every tech who touches your car.
Ask what urethane they use and what the safe drive-away time is
Urethane is the black adhesive that bonds the glass to your car’s frame. It is not caulk. It is a structural part. Federal standard FMVSS 212 requires the windshield to stay in the car during a crash. The urethane is what keeps it there.
Every urethane has a safe drive-away time, or SDAT. That is how long the adhesive needs before the bond can survive a crash. It is set by the manufacturer, not by the tech, and it changes with temperature and humidity. A fast-cure urethane in Victoria heat might hit SDAT in 30 minutes. The same product on a cold, damp February morning takes longer.
So ask three things. What urethane product are you using? What is the safe drive-away time today? Will you write it on my invoice?
“You’re good to go” is not an answer. A real shop gives you a number and puts it in writing. Then it tells you to keep a window cracked and skip the car wash for 24 hours.
Ask if they recalibrate ADAS cameras in their own shop
Look at the top of your windshield, behind the mirror. If there is a camera there, your car has ADAS. That camera runs lane keeping, automatic braking, and adaptive cruise. It aims through the glass.
Swap the glass and the camera’s view shifts. It does not take much. A camera aimed a fraction of a degree off at the mirror is aimed several feet off down the road. Your car will not warn you. It will simply brake late.
That is why the calibration matters as much as the install. Static calibration has rules. It needs a flat, level floor. It needs targets set at measured distances. It needs steady light and room around the car. A driveway on a windy afternoon gives you none of that.
So ask this. Do you recalibrate here, or do you send my car to the dealer? If they send it out, you are paying for a second appointment and a second trip. Ask for the calibration report either way. You want the printout that says the camera passed.
Six Flags Glass does windshield camera recalibration in our Victoria shop, on a level floor, with the targets the manufacturer specifies. Your car goes out the door aimed and documented.
Five questions to ask before you book
- Is the technician on my car AGRS certified?
- What urethane are you using, and what is today’s safe drive-away time?
- Will you put that time on my invoice?
- Does my car have a camera, and do you recalibrate it in house?
- What does your warranty cover, and for how long?
Talk to Six Flags Glass about your windshield
Six Flags Glass has been on East Airline Road in Victoria since 1963. That is 63 years and three generations of the same family. We do not run our techs on volume quotas, because our name is on the sign and our neighbors are the customers.
Call (361) 203-7319 or contact Six Flags Glass. We will tell you what glass your car takes, whether it needs calibration, and what you will pay before you commit. We serve Victoria, Cuero, Edna, Goliad, Inez, and Port Lavaca. See our full windshield replacement service.